This is the Squarebale Trailer.
I have added the Autoload to a Fliegl Flatbed. I give credit to Kentucky for the Fliegl Flatbed and Bigdaddy012678 credit for the Autoload. I simply combined the two. This is my first mod, Log looks clean however when you see trailer in store the supports are not down, so you will need a wheel loader to lift it but once you attach the trailer then unattach the supports work. Well hope you all enjoy.
- 5 Likes
- 14 Comments
- 4071 Downloads
-
1
Downloads in
-
6 years ago
Report file
COMMENTS
hello, would you do that with pallets and egg cartons, that would be good.
Yes we need autoloaders like in FS17 where they could autoload bales/pallets/etc. Also allow for unloading location too. Tried a autoload mod for FS19 and it does not unload the bales to the ground, that needs to be fixed.
Still needs work to do.
2018-12-20 16:19 Error: Can't load resource 'C:/Users/Documents/My Games/FarmingSimulator2019/mods/FS19_Fliegl_Flatbed_Square_Autoload/store_fliegl.dds'.
it dont unload bales and trail dont have dollys fs19 sucks its a joke fs17 better
Jester Tester - I just checked and I forgot to copy over the store_fliegl.dds over for the squarebale trailer. Other than that any issues?
Bobby - The trailer unloads, you must first press Y then you need to use your mouse to maneuver the bale stack to the desired location (only to the left or right of the trailer or you can unload them to the back of the trailer where they are autoloaded to).
Full error log
Works fantastic for me I added another tier to the trailer so now I can haul 32 square bales but I'm trying to figure out how to use that bit of wasted space on the end. Could hold another 8 bales!
So those wanting a bigger Cotton Bale hauler this one will do it too if you add this under in the flatbed.xml
you can then load cotton bales onto the trailer. Tip this is Very Unrealistic as it treats the cotton bales as if they were squarebale size. It's a far cry to hauling 2 at a time though.
So those wanting a bigger Cotton Bale hauler this one will do it too if you add this under "baletypes" in the flatbed.xml
"baleType minBaleWidth="2.4" maxBaleWidth="2.5" minBaleHeight="2.4" maxBaleHeight="2.5" minBaleLength="4.8" maxBaleLength="5""
you can then load cotton bales onto the trailer. Tip this is Very Unrealistic as it treats the cotton bales as if they were squarebale size. It's a far cry to hauling 2 at a time though.
Sorry forgot it don't like > b
The trailer isn't balanced.
you cant get your truck underneeth it.
BAM you must use a front loader to connect it the first time, after that the supports work fine. With the holidays I havent had time to mess around with it and get it working right out of the shop. I will try to add pallets to it and get supports working.
I resolved your issue Tator, in the modDesc.xml under the slow_baleLoader type add this to it and it will resolve the support problem.
""
soon as I added that it worked just fine.
specialization name="suspensions"
the other issue that shows up as a warning of 3 components but only 1 loaded you were missing the following under components in your base of the flatbed.xml file
you need to put the following twice
component centerOfMass="0 0.8 0" solverIterationCount="10" mass="1"
and it resolves that warning.
Write a comment